Each System includes Fitting Cradles with "adjustable beds" (for adjustment of High / Low)
The following items are included in each PPFS system:
Two (2) each - Fitting Cradles and Pipe Rests, One (1) each - Pipe Nipple Rest,
Tee Rest, Short Radius Elbow Rest, 45 Degree Elbow Rest, Tri-spacer and Ratchet Wrench.
Four (4) Cinch Chains, Four (4) or Eight (8) Two Hole Bolts or Studs with Nuts
SPEEDRAIL standard configuration consists of three (3) lengths of square tube totaling
twenty (20) linear feet - 5' x 10' x 5' or forty (40) linear feet - 10' x 20' x 10' with leveling supports.
SPEEDRAILS are center punched and red dotted (on each section)
to provide quick and accurate 90° and 45° angles or any other desired angle (by mathematical calculation).
Customer may order any length or configuration (cost prorated).
The SPEEDRAIL Stanchion Supports will allow fitters, welders and helpers to "belly-up" from both
sides during the fit-up and tacking process with plenty of room for everybody (similar to "jack stands").
Most PPFS fixtures (when not in use) can be stored on the midrail directly under the SPEEDRAIL.
The height of the Support Stanchions will position the SPEEDRAIL such that
the average size fixtures will have a centerline height of 42".
The Support Stanchions are Powder Coated and include Floor (flush) Concrete Drop Anchors (Imbeds),
Machine Bolts, Leveling Nuts, Washers, Leveling Nut Wrench, and a Base Plate Hole Layout / Drill Template
Two (2) 7/8" All Thread Rods (for stabilizing the Drill Template after the first Hammer Drilled Hole)
Layout and Assembly Drawings for the SPEEDRAIL Stanchions will be provided.
(Customer to supply Hammer Drill, 7/8" Drill Bit and all other tools required for the installation)
Copyright © FitRite ::
All Rights Reserved
Tampa, FL 33605
Pipe Fitting Alignment - Texas
Pipe Fitting Tools Houston
Pipe Fitup Tool System El Paso
Pipe Alignment Tool System Austin
Pipe Alignment Tool Systems
Pipe Fitting - California, Louisiana
Faster Pipe Fitting San Diego
Welding Alignment Tool Los Angeles
Pipe Fitting Tools Baton Rouge
Pipe Fitup Tool System New Orleans
Pipe Fitting Alignment - East Coast
Pipe Fitting Tools Miami FL
Pipe Fitting Alignment Orlando FL
Pipe Fit Up Tools New York
Tube Fitting Tools Pittsburgh
Pipe Fitting Tools - Canada
Pipe Fitting Tools Calgary
Pipe UpFit System Grande Prairie
Pipe Fitting Equipment Edmonton
Pipe Fitting Tools Alberta CA